Ultrafiltration Large Series

SANBORN’s UFV Series of Ultrafiltration systems bring compact wastewater disposal/reuse technology to manufacturing facilities. Designed for waste volumes of up to 1,500 gallons per day (GPD), these economical systems allow for simple, continuous operation with a minimum of energy and operator involvement. All UFC systems employ ultrafiltration membrane technology to separate water and dissolved chemicals from suspended solids and emulsified oils. The process reduces wastes by as much as 98% without the use of chemical additives!

Machine Design

The state-of-the art designs include vertical centrifugal pumps that handle the abrasive solids encountered in most manufacturing waste fluids without the potential for pump seal leaking and failure.

The separation process is mechanical and operates without messy and expensive pre-filtration and, in most cases, produces a reusable or directly sewerable effluent thus dramatically reducing waste of disposal costs.

Models are shipped pre-wired and pre-piped for easy installation. Options include an integrated free-oil separator, automatic fluid transfer system, flushing shutdown system and packaged water reuse designs.

Standard Features

High-tec polymeric membrane is highly insensitive to chemicals and concentration changes in the waste feed stream.
Half-inch tubular membrane allows processing of high-solids waste.
System operates in batch or continuous mode.
Skid-mounted units install easily in the plant

Optional Equipment

Reduced waste volume saves on disposal costs.
Simple operation saves on labor costs and
gives an extremely low operation costs.
Positive membrane barrier ensures consistent effluent quality
Lower waste volumes reduce environmental liabilities.
Unattended operation and limited maintenance saves man-hours.

Model
UFV250TV
UFV500TV
UFV750TV
UFV1500TV
Volume Processed (GPD)
250
500
750
1500
Process Tanks (gal.)
180
180
330
330
Cleaning Tank (gal.)
50
50
70
70
Number of Membranes
4
4
12
12
Length of Membranes (ft.)
5
10
5
10
Process & Cleaning Pumps GPM/Pump
50
50
100
100
Pump HP
5
5
10
10
Amp Draw @ 460 volts
7.5
7.5
15
15
Dimensions (L x W x H, in.)
74 x 39 x 81
74 x 39 x 142
86 x 48 x 81
86 x 48 x 145
With SOS (Free-Oil Separator) (LWH) Inches
89 x 39 x 81
89 x 39 x 142
100 x 48 x 81
100 x 48 x 145
Weight
1700
1800
2100
2200
Weight with SOS
2000
2100
2400
2500
Operating Conditions
pH Range 2-12
Temperature 50-125 deg F