Electronic Components Process Examples
Bel Air develops precision deburring, polishing, & surface finishing solutions for electrical components. Below you will see parts such as pin connectors, kovar connectors, & housings processed in methods such as vibratory tumblers, centrifugal disc, & roll burnishers.
Deburr Brass & Bronze Pin Connectors
Objective | Deburr Fine Cross Slots
|
|---|---|
Part Description | Electronic Connectors
|
Material | Brass |
Process Type | High Energy Mini Hoppa
|
These microscopic screw machined connectors needed to have their cross slots and other surfaces deburred.
Bel Air was able to develop a high volume system of deburring, cleaning, and drying that was able to increase customer production 3X.
Objective | Need for automating the de-gating of the die castings and add light deburring into the de-gating operation |
|---|---|
Part Description | Electronic die casting |
Material | zemac |
Process Type | Low energy vibratory finishing |
Objective | Deburr edges & threads
|
|---|---|
Part Description | Automotive Connector
|
Material | Aluminum |
Process Type | Centrifugal Disc Finisher
|
Objective | Deburr |
|---|---|
Part Description | Electronic Connector
|
Material | Aluminum |
Process Type | Centrifugal Disc Finisher
|
Objective | Eliminate hand deburring |
|---|---|
Part Description | Machined Heatsink Package |
Material | Aluminum |
Process Type | Deburring Machine |
Objective | Deburr |
|---|---|
Part Description | Coaxial Connector |
Material | Stainless steel |
Process Type | Centrifugal Disc Finisher |
Objective | Deburr edges |
|---|---|
Part Description | Bus Bar Connector |
Material | Copper |
Process Type | Vibratory Finisher |
Objective | Deburring cut-out edges |
|---|---|
Part Description | Electrical Contact |
Material | Copper |
Process Type | Vibratory Polisher |
Objective | Refurbish |
|---|---|
Part Description | Bus Duct |
Material | Copper |
Process Type | Centrifugal Disk Finishing |
Objective | Deburr |
|---|---|
Part Description | Electrical Contact |
Material | Brass |
Process Type | Centrifugal Disc Finisher |
Objective | Deburr edges |
|---|---|
Part Description | Electrical Connector |
Material | Brass |
Process Type | Centrifugal Finishing Machine |