High Energy Centrifugal Disc Finisher twenty two liter capacity
Bel Air FMSL 22 series centrifugal disc finishers are ideal for precision deburring of all types of stamped or machine parts and are available with 1, 2 or 3 process chambers in any combination of wet or dry process bowls. Excellent for finishing conventional materials such as brass, copper, steel, and aluminum as well as alloys such as kovar, inconel, stainless steel, titanium, etc. Centrifugal disc finishing technology enables deburring into grooves and corners that conventional vibratory or tumble deburring is unable to reach. Cycle times are dramatically reduced by up to one tenth of normal deburring cycles. Flat part thickness as low as .012 an be processed. Hollow parts with wall thickness as low as .003 can be gently deburred or polished. Easy to use, low maintenance with field replaceable wear parts. Excellent for the micro electronic and medical industries.


Small compact design with integrated parts/media separation equipment, on-board media storage and optional integrated ultrasonic cleaner are ideal for work cells and cellular manufacturing.

Specially designed gap systems between rotating disc and chamber top guarantee the use of finest polishing and grinding mediums, and is the easiest gap system to adjust and maintain.

The Twist Gap Adjustment Method enables an easy and uncomplicated gap adjustment within the hundredth range without additional tools. Down-time and costs arising in this connection are drastically reduced. Due to a complete PU interior lining in the gap area, it can be assured that there will be no damage to the work pieces processed. Wear components are easily serviced by your maintenance personal with basic hand tools. Wear components can be replaced in a matter of minutes, minimizing production down-time.


Heavy duty modular aluminum extrusion frame
Twist Gap Adjustment
Tilting Bowl for easy parts/media
Integrated S.S. Separation Equipment
On-board S.S. Media Storage Bins
Integrated Dosing Pump for Wet Bowls
Aircool System for Dry Bowls
PLC Controlled Rinse System
Integrated Compound Dosing Pump
Allen Bradley PLC with Touch Screen controls for; process time, auto-reverse time, vary speed, dosing, rinse settings, low-level shut-off, e-stop.
220 – 240V/3 Phase


Down Graded Control Panel with Unitronics PLC/Touch-Screen
Direct Soap Feed Rinse/Compound System (elliminates pre-mixing of compound)
Integrated Ultrasonic incorporated into machine frame
Stack-Lite module
Recipe Storage for up to 99 processes, password protected (Allen Bradley Panels only)
Vibrating S.S. Media/Parts separation
Auto and semi-automatic parts media separation units
Bowl Covers for additional operator safety.



Length (in/cm)
Width (in/cm)
Height (in/cm)
Volume (liters)
Volume (Cu. Ft.)
Bowl Dia. (in/cm)
Weight (lbs)
Voltage / Phase
FMSL 22 /1
23 / 58
39 / 99
59 / 149
14.5 / 36
FMSL 22 /2
45 / 114
39 / 99
59 / 149
22 X 2
.75 X 2
14.5 / 36
FMSL 22 /3
66 / 167
39 / 99
59 / 149
22 X 3
.75 X 3
14.5 / 36