Magnetic separator used for lifting small iron and steel parts
Magnetic Separators
Small and large sized magnetic gun separator, separates magnetic parts from media
Pistol Grip Series
Magnetic lift series used for picking up iron and steel parts
Magnetic Lift Series

Magnetic Lift Series

Improved Design ● Rugged Construction Plastic Case ● Stainless Steel Available

Multilifts provide an effective and rapid means of lifting small iron and steel parts from stock bins, boxes, kegs, tables, or floor, or to separate parts from tumbling media. Smooth, uninterrupted side surfaces allow fast, easy burrowing into loose materials. A fingertip pull on the release bar drops the load. The standard units have a nylon lower case. A stainless steel lower case is available for hot or very abrasive material. See below for technical specifications.

Item #
Pickup Capacity (lbs)
Width
Length
Overall Height
Weight (lbs)
MS-MLS-71
2-3
1-5/8″
4-3/4″
9-1/4″
2-3/4
MS-MLS-72
4-5
3-1/8″
4-3/4″
9-1/4″
4-1/2
MS-MLS-72SSC
4-5
3-1/8″
4-3/4″
9-1/4″
4-3/4
MS-MLS-72SS
4-5
3-1/8″
4-3/4″
9-1/4″
5
MS-MLS-74
6-8
4-3/4″
6-1/4″
9-3/4″
8

*SSC = Stainless Steel Clad – SS = All Stainless Steel Construction

Pistol Grip Series

Quick and Easy Separation of Parts

Easy parts separation at your fingertips for any Magnetic Finisher. This exclusive design eliminates the tedious separation of parts from media. Raytech Magnetic Separators can even be placed in water to separate parts. There is no need to drain water as separator will not rust. See below for technical specifications.

Item #
Description
MS-PG-2
Magnetic Gun Separator, Small
MS-PG-3
Magnetic Gun Separator, Large