Disc Finisher FMSL 8T Series

Click Here, to print a pdf Spec Sheet.

Table top series centrifugal disc finishers are available in single, double or triple chamber configurations. Wet or dry processing chambers are to be specified. For precision deburring of all type stamped or machine parts. Excellent for finishing conventional materials such as brass, copper, steel and aluminum as well as alloys such as kovar, inconel, stainless steel, titanium, etc. Centrifugal disc finishing technology enables deburring into grooves and corners that conventional vibratory or tumble deburring is unable to reach. Cycle times are dramatically reduced by up to one tenth of normal deburring cycles. Flat part thicknesses as low as .012 can be processed. Hollow parts with wall thicknesses as low as .003 can be gently deburred or polished. Easy to use, low maintenance. Excellent for the micro electronic industry.

• MACHINE DESIGN
Working receptacles which can be put together in a modular way in the domain of wet and dry processing.Small compact table top design offers the same features as the full sized floor models, without the large footprint.

Specially designed gap systems between rotating plate and working receptacles guarantee the use of finest polishing and grinding mediums. By means of a permanent air cushion, the AIRCUTEC System prevents that finest granulated particles are penetrated into the gap area, thus maintaining a constantly low temperature within the interior space of the receptacle. There is no additional heat due to friction in the gap area as is the case with other traditional systems.
The Twist and Click Method enables an easy and uncomplicated gap adjustment within the hundredth range without additional tools. Rest periods and costs arising in this connection are drastically reduced. Due to a complete PU interior lining in the gap area too, it can be assured that there will be no damage to the work pieces treated.
Circulation working receptacles with regard to wet processing for the use of micro filtration systems.

• OPERATING SAFETY
Float switch for the compound container.
Thermal switch and current checking.
Ventilated electric insulation.
Worldwide service for mounted electronic components.

• PROCESS ENGINEERING
AIRGRIND System makes a hard and finish grinding into one single operating cycle possible (no more need for a water bath.) The parts are gently treated, thus creating a light surface. Water consumption and processing times are reduced significantly and additional working cycles are avoided. A continuous change of the sense of rotation prevents that the work pieces are treated on only one side.
Special three stage processing for the treatment of silver.
Easy treatment of jewelry pieces featuring zircon.
New compounds, specially applicable to the circular movement processing (micro filtration.)

STANDARD EQUIPMENT

EXTRAS

• Synchronous belt drive
• Hot potted PU interior lining
• Flow optimized geometry in process container
• Speed control via frequency converter
• Digital time control with adjustment of hours and minutes
• Storage bins for granules
• Screen device
• Twist and click method

• Dosing pump, or
• Dosing unit, Flushing device
• Airgrind System
• Aircutec System
• Additional seats for storage bins for granules
• Control via operator control panel
• Automatic screen units

OPERATING RANGE

• Watch and clock as well as jewelry making industry
• Spectacles making industry
• Micromechanics and precision mechanics
• In case of spring and boards

 TECHNICAL DATA

 Type

Length
(mm)

Width
(mm)

Height
(mm)

Volume
(l)

Weight
(kg)

Power Consumption (kW)

 SL 8/1T

67

85

149

1 x 8

84

1 x 0,45 kW/230V

 SL 8/2T

108

85

149

2 x 8

137

2 x 0,45 kW/230V