|
Click Here, to print a pdf Spec Sheet.
|
|
Precision De-burring - Polishing
Larger capacity floor models centrifugal disc finishers are available in single, double or triple chamber configurations. Wet or dry processing chambers are to be specified. For precision deburring of all type stamped or machine parts. Excellent for finishing conventional materials such as brass, copper, steel and aluminum as well as alloys such as kovar, inconel, stainless steel, titanium, etc. Centrifugal disc finishing technology enables deburring into grooves and corners that conventional vibratory or tumble deburring is unable to reach. Cycle times are dramatically reduced by up to one tenth of normal deburring cycles. Flat part thicknesses as low as .012 can be processed. Hollow parts with wall thicknesses
as low as .003 can be gently deburred or polished. Easy to use, low maintenance. Excellent for the micro electronic industry.
|
A SYSTEMATIC FURTHER DEVELOPMENT of the Stream-Liner generation in the field of medium sized and commercial sized installations for the industrial and jewelry sector. New standards are set by the further developed wearing materials which are especially used in the gap area. Thus the service life will be increased, costs for wearing parts decreased and damages of the work pieces avoided during the processing time. There are no bottlenecks with regard to capacity and there are no losses with respect to quality in case of heavily varying forms and weights of the work pieces. The special features of this machine group are short processing cycles, highest standards of the surface qualities and a flexible handline as well. Use of finest polishing and grinding media by the proved systems AIRCUTEC and FINUTEC.
|
